{"id":3586,"date":"2026-10-08T18:49:32","date_gmt":"2026-10-08T10:49:32","guid":{"rendered":"http:\/\/www.neomedicaldevices.com\/blog\/?p=3586"},"modified":"2026-10-08T18:49:32","modified_gmt":"2026-10-08T10:49:32","slug":"how-does-a-sedimentation-tank-work-in-the-mining-process-44c8-cea4a5","status":"publish","type":"post","link":"http:\/\/www.neomedicaldevices.com\/blog\/2026\/10\/08\/how-does-a-sedimentation-tank-work-in-the-mining-process-44c8-cea4a5\/","title":{"rendered":"How does a sedimentation tank work in the mining process?"},"content":{"rendered":"

If you\u2019ve spent any time in mining circles\u2014whether you\u2019re a mine site superintendent, process engineer, or equipment manager\u2014you know that water is one of the industry\u2019s most valuable, and most fraught, resources. For every ton of ore extracted, dozens, sometimes hundreds, of gallons of water are used to separate precious minerals from waste rock, crush and grind ore to a fine powder, and transport slurry through processing circuits. But that water doesn\u2019t stay clean; once it\u2019s done its job, it\u2019s loaded with fine rock particles, residual chemicals, and heavy metals that can\u2019t just be poured back into nearby rivers, lakes, or aquifers without causing serious environmental harm. That\u2019s where sedimentation tanks come in, and as a mining equipment supplier, I\u2019ve helped dozens of operations get these critical systems up and running to turn waste water into a reusable, sustainable resource. Let me walk you through how these workhorses of mining processing actually operate\u2014no jargon overload, just real-world context from the people who build, sell, and rely on this equipment every day. Mining Equipment<\/a><\/p>\n

<\/p>\n

First, let\u2019s set the scene. At a typical copper or gold mine, right after ore is crushed into fist-sized chunks, it\u2019s run through ball mills that grind it into a slurry\u2014think wet, muddy silt mixed with fine rock particles as small as talcum powder. That slurry isn\u2019t just rock and water; it often has flotation chemicals added later to separate valuable minerals, but before that step, or after it\u2019s completed, you have a stream of waste slurry called tailings. Tailings are the largest waste stream in mining, and they\u2019re also the main reason sedimentation tanks are non-negotiable. The alternative? Damming tailings in open ponds, which leaks water, erodes, and poses environmental risks that have been well-documented for decades. Sedimentation tanks solve that problem by separating those tiny solid particles from the water so the water can be recycled back into the processing plant, cutting down on fresh water needs by 50% or more in many cases, and the solid waste can be stored or disposed of safely.<\/p>\n

So how does the process actually unfold step by step? It starts with feeding the slurry into the tank\u2014specifically, the center feed well, which is the large pipe that drops slurry straight into the middle of the tank, right at the surface. If you\u2019ve ever watched a drop of ink hit a glass of water, you know it spreads out quickly; the feed well does the same, but at an industrial scale. The key here is that the tank is designed to slow the flow of water down to a crawl. Mining slurry is full of fine particles, but even tiny particles have weight\u2014given enough time, they\u2019ll sink if they\u2019re not being jostled or carried away by fast-moving water. The tank\u2019s diameter is usually hundreds of feet wide for large operations, which gives that slurry plenty of space and time to slow down.<\/p>\n

Next, we add flocculants and coagulants. This is the part where a lot of new mine operators get tripped up. Coagulants are chemicals like polyaluminum chloride, and they work like tiny magnets: they grab onto the smallest, negatively charged rock particles that repel each other in water, neutralizing that charge so the particles can stick together. Then flocculants, usually long-chain polymers, come in and tie those neutralized particles together into larger clumps called flocs. A lot of new operations either use too little or too much of these chemicals; too little, and the flocs never form, so particles stay suspended and never settle. Too much, and you\u2019re wasting money on chemicals that don\u2019t help, plus the over-sized flocs can clog filters or carry valuable minerals along with the waste. As an equipment supplier, I work with mine teams to test slurry samples and tune the chemical dosage specifically for their ore type\u2014gold ore is different from iron ore, which is different from coal\u2014so the flocculation is perfect.<\/p>\n

Once the flocs are formed and heavy enough, they sink to the bottom of the tank, a layer called underflow, which is the concentrated slurry of tailings that\u2019s ready to be sent to storage or further dewatering. The clearer water left on top, called overflow, is pulled off the tank to be reused. Now, how does that underflow get out without clogging the tank? Most large sedimentation tanks use a rake system, a slow-moving set of metal arms that span the diameter of the tank, rotating just once every few minutes or hours\u2014slow enough that it won\u2019t disturb the settling particles, but steady enough to push the thick underflow toward a sump at the center of the tank\u2019s bottom, where it\u2019s pumped out. That rake system is a critical piece of the equipment; I\u2019ve seen tanks with inadequate rakes that get clogged with hard, dried tailings within a month, bringing processing to a halt. The size and shape of the rake blades, the speed of rotation, and the material they\u2019re made from (we use abrasion-resistant steel for hard rock mining) are all tailored to the mine\u2019s specific underflow consistency.<\/p>\n

Wait, not all sedimentation tanks are the same, right? I often get asked the difference between a conventional sedimentation tank and a high-rate thickener, which is what many modern mines use now. Conventional tanks are the older style, designed for slower settling particles, with a larger footprint. High-rate thickeners, though, are optimized for mining applications, with deeper cone bottoms, better rake mechanisms, and chemical dosing points integrated right at the feed well to jumpstart flocculation before the slurry even spreads out. They can process 2 to 3 times more slurry in the same footprint, which is a huge win for mines working on tight land parcels or with expanding processing capacity. Last year, I worked with a small gold mine in Nevada that needed to double their slurry processing without expanding their site; switching to a high-rate thickener cut their tank footprint in half and let them keep their existing water recycling rate steady at 70%, which saved them over $100,000 a year in fresh water costs.<\/p>\n

Let\u2019s talk about common pain points I see with mining sedimentation tanks, because that\u2019s the stuff that real operators deal with every day. First, wear and tear. The slurry in mining tailings is not soft\u2014 it\u2019s full of silica, iron oxide, and other hard minerals that act like sandpaper on the tank walls, rakes, and feed pipes. A lot of cheap, generic equipment suppliers use mild steel for parts, which only lasts 6 to 12 months in hard rock mining, leading to unplanned shutdowns. The equipment we supply uses wear-resistant liners on all wetted surfaces, plus replaceable rake blade tips that can be swapped out in a matter of hours, not days, which minimizes downtime. Another big issue is overflow clarity. If the overflow water is too muddy, it can\u2019t be recycled back into the process, so operators have to use fresh water, defeating the whole purpose of the sedimentation tank. That\u2019s usually a sign of incorrect chemical dosing, or rakes moving too fast and disturbing the settled bed at the bottom. We don\u2019t just sell the tank equipment\u2014we provide on-site testing for the first 90 days of operation to adjust dosing and rake speed, so the mine gets that clear, reusable water right away.<\/p>\n

Environmental regulations are another big driver here, and I can\u2019t overstate how important that is for mining. In most parts of the world, mines are required to have zero liquid discharge (ZLD) targets, meaning they can\u2019t release any process water into the environment. Sedimentation tanks are the backbone of that ZLD system, because they remove enough solids from the process water to meet discharge limits, and recycle the rest. A few years ago, I worked with a coal mine in West Virginia that was facing a $2 million fine for releasing muddy water into a nearby stream. We retrofitted their existing sedimentation tank with a new rake system and automatic chemical dosing unit, and within 6 weeks, their overflow was clear enough to reuse in their coal washing process, eliminating the discharge and the fine. That\u2019s not just about compliance\u2014it\u2019s about protecting the local ecosystem, and avoiding costly operational disruptions.<\/p>\n

Now, let\u2019s get into the long-term benefits, beyond just water savings. The underflow from sedimentation tanks, once dewatered, takes up 80% less space than it would if it was left as thin slurry in open ponds, so mines can reduce the size of their tailings storage facilities (TSFs), which is a huge safety and cost factor. TSF failures are rare, but when they happen, they\u2019re catastrophic\u2014last decade\u2019s Mount Polley disaster in British Columbia is a stark reminder of that. By concentrating tailings into a smaller volume with sedimentation tanks, mines reduce the risk of TSF failures, and make it easier to safely stack the dry tailings in lined cells. Plus, the recycled water from the sedimentation tank cuts down on energy use for pumping fresh water, and reduces the need for water rights, which are becoming increasingly competitive as droughts become more common in mining regions like the Western U.S., Chile, and Western Australia.<\/p>\n

As a mining equipment supplier, I\u2019ve seen firsthand how a well-designed sedimentation tank can turn a mine\u2019s biggest waste stream into its most valuable resource. It\u2019s not just a big tank with a rake\u2014it\u2019s a system that balances chemistry, hydraulics, and mechanical design to work with the unique conditions of each mine\u2019s ore. Too often, mine operators view sedimentation tanks as an afterthought, something to be installed once and forgotten, but the best operations treat them as a core part of their processing circuit, and invest in equipment that\u2019s tuned for their specific needs.<\/p>\n

If you\u2019re a mine manager, process engineer, or maintenance supervisor looking to upgrade your existing sedimentation tank or install a new one for your processing circuit, I\u2019ve helped dozens of operations navigate the decision\u2014from testing slurry samples to matching equipment to your production capacity and site constraints. You don\u2019t have to rely on generic equipment that doesn\u2019t account for the harsh conditions of mining, or skimp on wear parts that will fail after a few months. We work with you every step of the way, from initial consultation to post-installation support, to make sure your sedimentation tank runs efficiently, keeps your water clean, and keeps your mine operating smoothly.<\/p>\n

<\/p>\n

Contact us today to discuss your sedimentation tank needs and get a custom solution tailored to your mining process.<\/p>\n

Steel Ball Skew Rolling Mill<\/a> References:<\/p>\n